OpenBSD 4.2-stable (GENERIC) #5: Sun Dec 9 22:10:49 MST 2007 root@packetmischief:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF real mem = 1206480896 (1150MB) avail mem = 1157132288 (1103MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, BIOS32 rev. 0 @ 0xfb600, SMBIOS rev. 2.3 @ 0xf0800 (34 entries) bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 07/11/2006 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdac4 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd9e0/208 (11 entries) pcibios0: PCI Exclusive IRQs: 5 7 9 10 11 12 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xc800 0xd0000/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02 "Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured "Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at 0xd8000000, size 0x8000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 7 uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 9 ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 5 usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82 pci1 at ppb0 bus 1 bce0 at pci1 dev 5 function 0 "Broadcom BCM4401B1" rev 0x02: irq 12, address 00:02:b6:34:51:68 bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0 bce1 at pci1 dev 6 function 0 "Broadcom BCM4401B1" rev 0x02: irq 10, address 00:02:b6:34:51:69 bmtphy1 at bce1 phy 1: BCM4401 10/100baseTX PHY, rev. 0 bge0 at pci1 dev 7 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): irq 11, address 00:02:b6:41:02:d5 brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 bge1 at pci1 dev 9 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): irq 5, address 00:02:b6:41:02:d6 brgphy1 at bge1 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) wd0 at pciide0 channel 1 drive 0: wd0: 1-sector PIO, LBA, 245MB, 501760 sectors wd0(pciide0:1:0): using PIO mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 10 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: spkr0 at pcppi0 lm0 at isa0 port 0x290/8: W83627HF npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask efe5 netmask ffe5 ttymask ffe7 pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b