OpenBSD 4.8-stable (GENERIC) #8: Sun Jan 23 18:12:31 MST 2011
    root@packetmischief:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 1073311744 (1023MB)
avail mem = 1045786624 (997MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, BIOS32 rev. 0 @ 0xfb600, SMBIOS rev. 2.3 @ 0xf0800 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 07/11/2006
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdac4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd9e0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 7 9 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x1000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd8000000, size 0x8000000
inteldrm0 at vga1: irq 7
drm0 at inteldrm0
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 7
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 9
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
pci1 at ppb0 bus 1
bce0 at pci1 dev 5 function 0 "Broadcom BCM4401B1" rev 0x02: irq 12, address 00:02:b6:34:51:68
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
bce1 at pci1 dev 6 function 0 "Broadcom BCM4401B1" rev 0x02: irq 10, address 00:02:b6:34:51:69
bmtphy1 at bce1 phy 1: BCM4401 10/100baseTX PHY, rev. 0
bge0 at pci1 dev 7 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): irq 11, address 00:02:b6:41:02:d5
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
bge1 at pci1 dev 9 function 0 "Broadcom BCM5788" rev 0x03, BCM5705 A3 (0x3003): irq 5, address 00:02:b6:41:02:d6
brgphy1 at bge1 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <SanDisk SDCFH-1024>
wd0: 4-sector PIO, LBA, 977MB, 2001888 sectors
wd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: irq 10
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efe5 netmask ffe5 ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b