You have:

1. A Roomba vacuum. (I was working with an i-series when I wrote this. Maybe this applies to other models as well.)
2. A firewall or router between your Roomba and your mobile device. (Maybe the two are on different wifi networks as would be the case if you have a network set aside for IoT devices.)
3. An iRobot app that gets stuck at Verify password when setting up the Roomba.

A friend of mine recently had a solar panel system installed on his acreage. Besides being interesting because of the renewable/green aspect of the project, the system itself—from SolarEdge—is actually highly digital.

• A mobile app is used for commissioning the system.
• SolarEdge operates a cloud service which collects telemetry from the system and reports various performance metrics in a user-friendly dashboard.
• The inverters can connect to the IP network and provide a means to collect telemetry from them directly.

The last point interested me the most because any time a device exposes its data or a control connection, it means there's an opportunity to integrate it with other software. In this case, I wanted to create my own dashboard to display (near) real-time performance data for the system.

Whereas other blogs and articles on this topic describe how to monitor a single inverter system, this post will describe how I built a performance dashboard for a multi-inverter system.

For years now I've had a light switch that can be programmed to turn itself on/off on a schedule. The switch is programmed with the date, time, time zone, and lat/long and then you can create a schedule such as, "turn the lights on at sun set". It works pretty well except when 1/ daylight savings time starts or stops (the schedule doesn't adjust itself) or 2/ the power goes out (bye, bye all programming).

This slight annoyance coupled with my desire for a project I could geek out on lead me to look into software-controllable light switches.

In this post I'll explain how I flashed the open source Tasmota firmware onto the Treatlife 3-way wall switch which in the end allowed me to control the lights via a home automation controller.